Control Device Removal and Installation: Installation

WARNING: This page is about a different car, the 2007 Nissan Versa. However, it is still accessible from the selected car via links, so may be relevant.

Installation is in the reverse order of removal. When installing the control cable (1) to the control device assembly (2), make sure that the control cable (1) is fully pressed in with the ribbed surface (A) facing downward from the vehicle.
<=: Vehicle front
After installation is completed, adjust and check the A/T position. Refer to "ADJUSTMENT OF A/T POSITION " and "CHECKING OF A/T POSITION ".

Fig 1: Identifying Control Cable To Control Device Assembly