Diagnostic Procedure: Notes

WARNING: This page is about a different car, the 2007 Nissan Versa. However, it is still accessible from the selected car via links, so may be relevant.

CHECK INPUT SIGNALS
With CONSULT-II
1. Start engine.
2. Select "MAIN SIGNALS" in "DATA MONITOR" mode for "A/T" with CONSULT-II and read out the value of "SLCT LVR POSI".
3. Check that the following three positions or indicators are same.
  - Actual position of the selector lever
  - "SLCT LVR POSI" on CONSULT-II screen
  - Shift position indicator in the combination meter
OK or NG

OK >> INSPECTION END

NG >> Check the following.