LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Yaris S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Automatic Transmission) >> Shift Control System >> Control Device Disassembly and Assembly >> Disassembly

Control Device Disassembly and Assembly: Disassembly

WARNING: This page is about a different car, the 2007 Nissan Versa. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Refer to "CONTROL DEVICE COMPONENTS " to disassemble.
  1. Remove selector lever knob from control device assembly. Refer to "SELECTOR LEVER KNOB REMOVAL AND INSTALLATION ".
  2. Remove position lamp from position indicator plate (1).
  3. Insert a flat-bladed screwdriver to (A) (at 4 locations) as shown, and bend each hook slightly to raise position indicator plate (1) and remove from control device assembly (2).
  4. Remove bracket from control device assembly (2).
  5. Remove A/T device harness connector from control device assembly (2).
    Fig 1: Identifying Indicator Plate And Control Device Assembly
    G04813176
  6. Release tabs (A) on shift lock solenoid and park position switch assembly from hooks (B) on control device assembly to shift lock solenoid and park position switch assembly.
    Fig 2: Identifying Tabs And Hooks
    G04813177
scientia non olet · About LEMON Manuals