Control Valve Upper Body: Assembly: Notes
WARNING: This page is about a different car, the 2007 Nissan Versa. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- Apply ATF to all components before installation.
- Lay control valve body down when installing valves. Do not stand control valve body upright.
Lubricate control valve body and all valves with ATF. Install control valves by sliding them carefully into their bores.
CAUTION:
- Install each control valve one by one.
- Install control valves after checking, because some of them are similar.
- Be careful not to scratch or damage valve body.
- Wrap a small flat-bladed screwdriver A with vinyl tape and use it to insert valves into their proper positions.
- Install retainer plates (1).
- While pushing plug or return spring, install retainer plate (1) using a flat-bladed screwdriver A.