Diagnostic Procedure

WARNING: This page is about a different car, the 2007 Nissan Versa. However, it is still accessible from the selected car via links, so may be relevant.

CHECK DTC
With CONSULT-II
1. Turn ignition switch ON and select "SELF-DIAG RESULTS" mode for A/T with CONSULT-II.
2. Touch "ERASE".
3. Perform "DTC CONFIRMATION PROCEDURE ".
Is the "CONTROL UNIT (RAM)" or "CONTROL UNIT (ROM)" displayed again?

YES >> Replace TCM. Refer to "REMOVAL AND INSTALLATION ".

NO >> INSPECTION END