LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1993 >> MR2 2.0 S >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System >> Testing Anti-Theft Circuits >> Test 2 >> Indicator Light Circuit

Indicator Light Circuit

Verify ATS indicator light operation. See INDICATOR LIGHT  under TESTING ANTI-THEFT SYSTEM COMPONENTS. Turn ignition off. Disconnect ATS ECU connector. Connect negative ohmmeter lead to ECU terminal No. 16 (MR2, Yellow wire without power locks) and positive lead to ground. If continuity is not present, repair open in indicator light circuit harness or connectors. If continuity is present, replace ATS ECU and retest.

NOTE: Indicator light circuit includes Light Emitting Diode (LED). If circuit shows no continuity, reverse positive and negative leads and retest circuit.