Indicator Light
Remove combination meter. Locate 13-pin "B" connector in middle of combination meter. Connect three 1.5 volt dry cell batteries in series. Connect positive lead to terminal No. B5 (Yellow wire) and negative lead to terminal No. B6 (Brown ground wire). If indicator light does not come on, replace light. If indicator light comes on, inspect wire harness and connectors between indicator light and Anti-Theft System ECU. See TESTING ANTI-THEFT CIRCUITS. Repair harness or connectors as necessary. If harness and connectors are okay, replace Anti-Theft System ECU.
NOTE:
For other Anti-Theft or Door Lock components refer to appropriate DOOR LOCKS - POWER
article in the ACCESSORIES/SAFETY EQUIPMENT section.