LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2000 >> Diamante ES >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Multiplex Control Systems >> System Tests >> Test No. 1

Test No. 1

Symptom indicates problem with instrument panel ECU power source, or if instrument panel ECU functions are not working, bad ground circuit. Probable causes are wiring, connector or instrument panel ECU malfunction.

  1. Check if simplified fault diagnostic mode can be entered. See RETRIEVING DIAGNOSTIC TROUBLE CODES (DTC)  under SELF-DIAGNOSTIC SYSTEM. If system goes into the simplified fault diagnostic mode, go to next step. If system does not go into simplified fault diagnostic mode, go to TEST NO. 2  .
  2. Check voltage between ground and DLC terminal No. 16 (Red/Black wire). If battery voltage is present, go to next step. If battery voltage is not present, repair Red/Black wire between engine compartment relay box fuse No. 13 (15-amp) and DLC terminal No. 16.
  3. Check continuity between ground and DLC terminal No. 4 (Black wire). If continuity is present, go to next step. If continuity is not present, repair Black wire between DLC and ground.
  4. Check continuity between ground and DLC terminal No. 5 (Black wire). If continuity is present, go to next step. If continuity is not present, repair Black wire between DLC and ground.
  5. Check Gray/Red wire between DLC terminal No. 1 and instrument panel ECU 22-pin connector B-23 terminal No. 16. Check Brown/White wire between DLC terminal No. 7 and instrument panel ECU connector B-23 terminal No. 17. Repair appropriate wire as necessary. If circuits are okay, replace instrument panel ECU.