LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2007 >> Rondo Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle System (F4A42) >> Automatic Transaxle System >> DTC P0703 Brake S/W Malfunction >> Signal Circuit Inspection

Signal Circuit Inspection

  1. Ignition "ON" & Engine "OFF".
  2. Disconnect "BRAKE LAMP SWITCH" connector.
  3. Measure voltage between terminal "1" of the sensor harness connector and chassis ground.

    Specification : 0V

    Fig 1: Measuring Voltage Between Terminal "1" Of Sensor Harness Connector And Chassis Ground
    G05186333Courtesy of KIA MOTORS AMERICA, INC.
  4. Is voltage within specifications?

    YES 

    NO