LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2007 >> Entourage GLS >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Immobilizer Control System >> Immobilize Control System >> DTC P1690 SMARTRA No Response >> Power Circuit Inspection

Power Circuit Inspection

  1. Check for open in harness
  1. Ignition "OFF"
  2. Disconnect SMARTRA.
  3. Ignition "ON" & Engine "OFF"
  4. Measure voltage value between terminal "4" of SMARTRA and chassis ground.

    Specification: 9~16V

    Fig 1: Measuring Voltage Value Between Terminal "4" Of SMARTRA And Chassis Ground
    G05325520Courtesy of HYUNDAI MOTOR CO.
  5. Is the measured voltage within specifications?

    YES 

    Go to "SIGNAL CIRCUIT INSPECTION " procedure

    NO 

    Check for open or short in harness. Repair as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure.