LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2006 >> S60 Base, AWD >> Repair and Diagnosis >> Collision >> Body Panels >> Body Panel Replacement >> Rear Fender >> Rear Fender, Replacing

Rear Fender, Replacing

Fig 1: Central Electrical Unit Bracket Weld Locations
GLL106932Courtesy of VOLVO CARS OF NORTH AMERICA.
NOTE: If the left rear fender is being replaced, the central electrical unit bracket must be positioned first

For the location of the bracket, see REAR SECTION, ALIGNMENT CHART .

Position the bracket.

Spot-weld. (3 spot-welds on top and two underneath)

Fig 2: Outer Rear Fender Panel Installation Weld Locations (1 Of 2)
GLL106936Courtesy of VOLVO CARS OF NORTH AMERICA.

Secure the rear fender. Check the alignment.

Weld into place.

Fig 3: Outer Rear Fender Panel Installation Weld Locations (2 Of 2)
GLL106937Courtesy of VOLVO CARS OF NORTH AMERICA.