LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 1997 >> 850 Base, 4D Sedan, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> System Tests >> Component Test Mode >> Introduction

Component Test Mode: Introduction

  1. This test mode is used to check the components that comprise cruise control system. By activating components one by one, and by giving control unit a response code if control unit has received a signal from component, sensor as well as wiring and connections can be checked. See COMPONENT TEST MODE CODES table.
  2. If correct response code is not obtained, go to appropriate testing for that particular response code. If correct response codes are obtained, go to VACUUM SYSTEM CHECK .
COMPONENT TEST MODE CODES

Code Activated Component
113  Selector ON/OFF
With Selector In ON Position
113  Brake Or Clutch Valve
123  Selector RESUME
131  Selector SET+
213  Selector SET-
223  Shift A/T From "N" To "D"
With Selector In OFF Position
132  Depress Brake Pedal
311  Several Signals