LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 1995 >> 850 Base, 4D Sedan, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Overhaul - Aw50-42LE >> Self-Diagnostic System >> System Test Functions >> Volvo Self-Diagnostic System

Volvo Self-Diagnostic System

System is capable of self-diagnostic functions through the use of diagnostic unit in engine compartment, or manufacturer's scan tool. Access to diagnostic system is provided by socket No. 1 on diagnostic unit with ignition on. See Figure. System has 6 test modes. Test mode No. 1 is used to display and clear codes. Test mode No. 2 is used to verify operation of system components. Test mode No. 3 operates components in a certain order.

Test mode No. 4 activates individual components to verify component operation when a specific code is input into diagnostic unit. Test mode No. 5 reads data values of various sensors. Values are for vehicle speed, throttle position, engine RPM and transaxle oil temperature. Test mode No. 6 is used to enter data to reset adaptive values for throttle signal and shift speed adjustment function. Shift speed must be reset when transaxle has been replaced.

NOTE: Manufacturer recommends use of scan tool when test modes No. 5 and 6 are performed. Follow manufacturer's instructions when performing these modes.
CAUTION: After displaying DTCs, ignition must be switched off BEFORE engine is started.