Test Mode No. 4 (Activating Individual Components)
- Test mode No. 4 activates individual components to verify operation when a specific code is input into diagnostic unit. Components are activated 6 times in sequence. Shift lever must be in "P" or "N" position and vehicle must be stopped. Rate of code transmission between TCM and diagnostic unit can be changed to 2 or 10 times the basic rate. Doubled rate can be used for reading codes from diagnostic unit LED. Highest rate is selected automatically when Volvo scan tool is used.
- To activate test mode No. 4, push diagnostic unit button 4 times. Enter code for chosen component. See COMPONENT ACTIVATION CODES table. One digit is entered each time diagnostic unit LED is lit. Diagnostic unit LED flashes when chosen component is activated. After testing components, system automatically exits test mode No. 4.
COMPONENT ACTIVATION CODES
| Component |
Code |
| No. 1 Shift Solenoid |
342 |
| No. 2 Shift Solenoid |
343 |
| Lock-Up Solenoid |
344 |
| Line Pressure Solenoid |
411 |
| Warning Indicator Light |
412 |
| Drive Compensation |
414 |
| Torque Limiting TC2 |
422 |
| Torque Limiting TC1 |
423 |
| Basic Code Transmission Rate |
311 |
| 2 Times Basic Code Transmission Rate |
312 |
| 10 Times Basic Code Transmission Rate |
313 |