Test Mode No. 1 (Displaying Codes)
- To display DTCs, open diagnostic unit cover (located in right corner of engine compartment) and connect test lead to socket No. 1. Turn ignition on. Enter test mode No. 1 by pressing test button once for 1-3 seconds.
- Observe LED, and count number of flashes in 3 digit series comprising a DTC. Because series are displayed at 3-second intervals, codes can be easily distinguished.
- If a DTC is displayed, refer to appropriate DIAGNOSTIC TROUBLE CODES DEFINITION table under TROUBLE CODE DEFINITION . Depress button again, and check for additional codes. Depress button a third time if necessary. If first code repeats, no other codes are present.