Guard Alarm I
- Ensure alarm is deactivated. Close all doors, hood, and trunk. Turn ignition on. Press function button on status panel until status LED and indicator LED are lit. Release function button. Using status panel function button, advance to unoccupied key code location I, II or III. An occupied location is indicated by a flashing LED. An unoccupied location is indicated by a steadily lit LED. If a code is programmed into an occupied location, the old code is erased.
- Select one of 3 locations. Send a code signal within 10 seconds using remote control. Alarm will acknowledge an approved code with brief flashes of status and indicator LED's before reverting to standard mode.