Brakelight Switch Check (Response Code 1-3-2)
- Step on brake pedal. If brakelight illuminates, check wiring between cruise control unit connector terminal 6S and brakelight switch. See Figure. If brakelight does not illuminate, go to next step.
- Remove driver-side knee protector. Connect voltmeter between brakelight switch Red wire and ground. If battery voltage is present, go to next step. If battery voltage is not present, check Red wire between brake light switch and fuse holder.
- Connect voltmeter between brakelight switch Yellow wire and ground. Step on brake pedal. If battery voltage is present, wiring is okay. If battery voltage is not present, ensure voltage supply is present at brakelight switch. If voltage supply is present, replacebrake light switch.