LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2022 >> Jetta S, Standard Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Assembly (1.5) >> 10 Engine Assembly >> Engine Cover >> Engine Cover, Removing And Installing >> Installing

Engine Cover, Removing And Installing: Installing

Install in the reverse order of removal while noting the following:

NOTE:

Before installing coat the ball pin with water without additive.

Check the correct seating of the rubber buffer in the engine cover and correct if necessary.

Adhere to the sequence during assembly.

-- Push the engine cover -1- on the ball pin -b-.

GWWN10-11039Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Then push the engine cover -1- on the ball pins -a-.