Rear Seat Center Belt Retractor Removal And Installation/Replacement

Mobile Repair Possible:  Van/Car

Overview: 

Courtesy of VINFAST, LLC

Removal Procedure: 

1. Remove the Center Rear Seat Back Trim Panel. Refer to REAR SEAT BACK TRIM PANEL REMOVAL AND INSTALLATION/REPLACEMENT
2. Fold down the left rear seat 2R.

   Courtesy of VINFAST, LLC

3. Remove and discard the torque prevailing bolt (1).

   Replace with new only. 

   Torque: 45 Nm 

   Courtesy of VINFAST, LLC

   Installation note: Ensure the correct position between the guides (1). 

   Courtesy of VINFAST, LLC

4. Remove the screw (1).

   Torque: 2 Nm 

   Courtesy of VINFAST, LLC

5. Remove the belt bezel (1).

   Courtesy of VINFAST, LLC

6. Remove and discard the torque prevailing bolt (1).

   Replace with new only. 

   Torque: 45 Nm 

7. Fold backrest forward and unthread the Center Belt Retractor (2) and remove it in the direction of the arrow.

   Courtesy of VINFAST, LLC

   Installation note: Ensure the correct position of the guides (1). 

Installation Procedure: 

1. Installation is the reverse of removal procedure, noting the following.

   All fasteners must be tightened to torque specification! 

2. Install the Center Rear Seat Back Trim Panel. Refer to REAR SEAT BACK TRIM PANEL REMOVAL AND INSTALLATION/REPLACEMENT