Front Sub Frame Longitudinal Beam Removal And Installation/Replacement
Mobile Repair Possible: No
Removal Procedure:
The procedure for the left-hand component is identical to that for the right-hand side.
- Remove front crash support bracket. Refer to FRONT CRASH SUPPORT BRACKET REMOVAL AND INSTALLATION/REPLACEMENT
- Remove bolt (1).
Torque: 35 Nm
- Remove expanding rivet (2).
- Remove 2 bolts (1).
Torque: 48 Nm
- Remove 2 bolts (2).
Torque: 35 Nm
- Remove front sub frame longitudinal (1) in the direction of the arrow.
Installation Procedure:
Installation note: When reinstalling the front sub frame, ensure that the sleeves (1) as shown is in place.
- Installation is the reverse of removal procedure, noting the following.
All fasteners must be tightened to torque specification!
- Install front crash support bracket. Refer to FRONT CRASH SUPPORT BRACKET REMOVAL AND INSTALLATION/REPLACEMENT