LEMON Manuals: Even more car manuals for everyone

Front Crash Support Bracket Removal And Installation/Replacement

Mobile Repair Possible:  No

Removal Procedure: 

The procedure for the left-hand component is identical to that for the right-hand side 

  1. Lift the vehicle. Refer to LIFTING AND JACKING THE VEHICLE
  2. Remove front bumper fascia. Refer to FRONT BUMPER FASCIA REMOVAL AND INSTALLATION/REPLACEMENT
    G15973140Courtesy of VINFAST, LLC
  3. Remove 2 bolts (1).

    Torque: 33 Nm 

  4. Remove 2 nuts (2).

    Torque: 24 Nm 

    G15973141Courtesy of VINFAST, LLC
  5. Remove the bolt (1).

    Torque: 6 Nm 

  6. Remove the front crash support bracket (2) from the longitudinal beam for subframe (3).

Installation Procedure: 

  1. Installation is the reverse of removal procedure, noting the following.

    All fasteners must be tightened to torque specification! 

  2. Install front bumper fascia. Refer to FRONT BUMPER FASCIA REMOVAL AND INSTALLATION/REPLACEMENT