LEMON Manuals: Even more car manuals for everyone
Home >> UD >> 2006 >> 1300 L4-4.7L DSL Turbo >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Testing and Inspection >> Component Tests and General Diagnostics >> Check the Ground

Check the Ground

CHECK THE GROUND







1. CHECK THE RESISTANCE BETWEEN TERMINALS.
1. Set the starter switch to "LOCK" and connect the signal check harness.
2. Disconnect the signal check harness connector on the ECU side.
3. Measure the resistance between PGD1(D1), PGD2(E4), PGD3(E5) and battery (-) terminals.

Standard: Less than 1 ohm