LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> Yaris L, Standard Trans >> Repair and Diagnosis >> Maintenance >> Procedures >> Maintenance - Service Information >> Engine >> General Maintenance [07/2015 - ] >> Procedure

General Maintenance [07/2015 - ]: Procedure

  1. INSPECT DRIVE BELT 
    1. Check the drive belt.

      Refer to INSPECTION [07/2015 - ]

  2. REPLACE ENGINE OIL AND OIL FILTER 
    1. Replace the engine oil.

      Refer to REPLACEMENT [07/2015 - 08/2018] , or refer to REPLACEMENT [08/2018 - ]

    2. Replace the engine oil filter.

      Refer to REPLACEMENT [07/2015 - ]

  3. INSPECT COOLING SYSTEM 
    1. Check that the radiator, condenser is not blocked with leaves, dirt or insects, and clean them if necessary. Also check the hose connection for the installation condition, corrosion, etc.
  4. REPLACE ENGINE COOLANT 
    1. Replace the engine coolant.

      Refer to REPLACEMENT [07/2015 - ]

  5. ENGINE COOLANT LEVEL 
    1. Check the engine coolant level.

      Refer to INSPECTION [07/2015 - 08/2019] , or refer to INSPECTION [08/2019 - ]

  6. CLEAN AIR CLEANER FILTER ELEMENT 
    1. Remove the air cleaner filter element.
    2. Visually check that the air cleaner filter element is not excessively damaged or oily. If necessary, replace the air cleaner filter element with a new one.
    3. If cleaning an air cleaner filter element, blow compressed air to clean it.
    4. Reinstall the air cleaner filter element.
  7. REPLACE AIR CLEANER FILTER ELEMENT 
    1. Replace the air cleaner filter element.

      Refer to REMOVAL [07/2015 - ]

  8. INSPECT FUEL LINES AND HOSES 
    1. Visually check the fuel lines and hoses for cracks, leaks, loose connections, or deformation.
    2. Check for tank band looseness or deformation.
  9. REPLACE FUEL FILTER 
    1. Replace the fuel filter.

      Refer to PROCEDURE - Step 1 [07/2015 - ]

  10. INSPECT HOSES AND TUBES (for Emission) 
    1. Visually check the hoses and tubes for cracks, leakage, loose connections and deformation.
  11. REPLACE SPARK PLUGS 
    1. Replace the spark plugs.

      Refer to REMOVAL [07/2015 - ]

  12. INSPECT EXHAUST SYSTEM AND HEAT SHIELDS 
    1. Check the exhaust system and heat shields.

      Refer to INSPECTION [07/2015 - ]