Installation [07/2015 - 08/2019]: Procedure
- INSTALL REAR SPEED SENSOR
- Install the bolt.
Torque: 9.0 N*m (92 kgf*cm, 80 in.*lbf)
*1 Bolt *2 Rear Speed Sensor *a Remove Clip While Pressing Arrow Indication. *b Body *c Clip - - Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping" : N*m (kgf*cm, ft.*lbf) - - - Install the clip.
- Press the rear speed sensor tab and press in the sensor toward the inside of the vehicle.
- Install the clip.
*a LH *b Connector *c Clip *d RH *e Rear Speed Sensor Wiring Harness - - - Install the connector.
- Install the following parts:
- Refer to INSTALLATION [07/2015 - ]
- Rear seat cushion
Refer to INSTALLATION [07/2015 - ]
- Rear scuff plate
Refer to INSTALLATION [07/2015 - ]
- Install the bolt.