LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> 86 Base, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System (Service Information) >> Fuel Tank >> Removal [03/2017 - ] >> Procedure

Removal [03/2017 - ]: Procedure

  1. DISCHARGE FUEL SYSTEM PRESSURE 

    Refer to PRECAUTION [06/2016 - ]

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 

    Refer to PROCEDURE - Step 1

  3. REMOVE SEPARATE TYPE REAR SEAT CUSHION ASSEMBLY LH 

    Refer to PROCEDURE - Step 1

  4. REMOVE SEPARATE TYPE REAR SEAT CUSHION ASSEMBLY RH 

    HINT: 

    Use the same procedure for the RH side as for the LH side.

  5. REMOVE NO. 2 REAR FLOOR SERVICE HOLE COVER 

    See step  5

  6. REMOVE REAR FLOOR SERVICE HOLE COVER 

    See step  8

  7. REMOVE FUEL SUCTION TUBE ASSEMBLY WITH PUMP AND GAUGE 

    See step  6

  8. REMOVE FUEL TANK RETURN TUBE 

    See step  9

  9. DRAIN FUEL 
  10. REMOVE NO. 3 FUEL TANK PROTECTOR (w/o Floor Under Cover) 
    1. Remove the nut, 2 clips and No. 3 fuel tank protector.
      GTY387207Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  11. REMOVE NO. 1 FUEL TANK PROTECTOR (w/ Floor Under Cover) 
    1. Remove the 2 nuts, 2 clips and No. 1 fuel tank protector.
      GTY729714Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  12. REMOVE NO. 2 FUEL TANK PROTECTOR (w/ Floor Under Cover) 
    1. Remove the 2 nuts, 2 clips and No. 2 fuel tank protector.
      GTY729713Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  13. REMOVE REAR SUSPENSION MEMBER SUB-ASSEMBLY 

    Refer to REMOVAL [03/2017 - ]

  14. REMOVE NO. 3 PARKING BRAKE CABLE ASSEMBLY 

    Refer to PROCEDURE - Step 11

  15. REMOVE NO. 2 PARKING BRAKE CABLE ASSEMBLY 

    Refer to PROCEDURE - Step 12

  16. DISCONNECT FUEL TANK TO FILLER PIPE HOSE 
    1. Loosen the hose clamp bolt and disconnect the fuel tank to filler pipe hose.
      GTY692323Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  17. DISCONNECT FUEL TANK VENT HOSE SUB-ASSEMBLY 
    1. Remove the clamp and disconnect the fuel tank vent hose sub-assembly.
      GTY386291Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage the clamp and separate the tube.
  18. REMOVE FUEL TANK ASSEMBLY 
    1. Disconnect the quick connector as indicated by the arrows in the order shown in the illustration.
      GTY689103Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Place an engine lifter under the fuel tank assembly.
      GTY392146Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Remove the 4 bolts, 2 No. 1 fuel tank bands and fuel tank assembly.
  19. REMOVE FUEL TANK TO FILLER PIPE HOSE 
    1. Loosen the hose clamp bolt and remove the fuel tank to filler pipe hose from the fuel tank assembly.
      GTY391547Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  20. REMOVE NO. 2 FUEL TANK MAIN TUBE SUB-ASSEMBLY 
    1. Remove the No. 2 fuel tank main tube sub-assembly from the fuel tank assembly.
      GTY391915Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the fuel filter from the No. 2 fuel tank main tube sub-assembly.
      GTY386112Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  21. REMOVE NO. 1 FUEL TANK CUSHION 
    1. Remove the 10 No. 1 fuel tank cushions shown in the illustration.
      GTY391546Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002