Crankshaft Position Sensor: Testing and Inspection

1NZ-FE ENGINE CONTROL: CRANKSHAFT POSITION SENSOR (for Sedan): INSPECTION

1. INSPECT CRANKSHAFT POSITION SENSOR





(a) Check the resistance.

(1) Using an ohmmeter, measure the resistance between the terminals.

Standard resistance:





HINT
In the table above, the terms Cold and Hot refer to the temperature of the coils. Cold means approximately -10 to 50 °C (14 to 122 °F). Hot means approximately 50 to 100 °C (122 to 212 °F).

If the resistance is not as specified, replace the crankshaft position sensor.