LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2012 >> Yaris Base, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System (Service Information) >> FUEL PUMP (for Hatchback) >> Inspection >> Inspection

FUEL PUMP (for Hatchback): Inspection: Inspection

  1. INSPECT FUEL PUMP 
    1. Check the resistance of the fuel pump.
      Fig 1: Identifying Fuel Pump Terminals
      GTY334666Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance

        Tester Connection Condition Specified Condition
        1 - 2 20°C (68°F) 0.2 to 3.0 Ω

        If the result is not as specified, replace the fuel pump.

    2. Inspect the operation of the fuel pump.
      1. Connect the positive (+) battery lead to terminal 1 of the connector, and the negative (-) lead to terminal 2. Check that the fuel pump operates.
        WARNING:
        • These tests must be performed within 10 seconds of connecting the battery to prevent the coil from burning out.
        • Keep the fuel pump as far away from the battery as possible.
        • Turn the voltage on and off on the battery side, not the fuel pump side.