LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2010 >> Sienna LE, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Brake Control System (Service Information)) >> VSC Off Switch >> Inspection >> Inspection

VSC Off Switch: Inspection: Inspection

WARNING: This page is about a different car, the 2010 Toyota FJ Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT VSC OFF SWITCH 
    1. Measure the resistance according to the value(s) in the table below.
      Fig 1: Identifying VSC Off Switch Component Without Harness Connected
      GTY172904Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Standard resistance

      Tester Connection Switch Condition Specified Condition
      3 - 4 Pressed Below 1 Ω
      Not pressed 10 kΩ or higher

      If the value is not as specified, replace the VSC off switch.