LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2010 >> Sienna LE, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Cruise Control System (Service Information)) >> Cruise Control Main Switch >> Installation >> Installation

Cruise Control Main Switch: Installation: Installation

WARNING: This page is about a different car, the 2010 Toyota FJ Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL CRUISE CONTROL MAIN SWITCH 
    1. Install the cruise control main switch with the 2 screws.
      Fig 1: Identifying Cruise Control Main Switch Connector & Screws
      GTY190415Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Torque: 2.4 N*m (24 kgf*cm, 21 in.*lbf) 

    2. Connect the connector.
  2. INSTALL STEERING PAD  . Refer toINSTALLATION - Step 2
  3. INSTALL NO. 3 LOWER STEERING WHEEL COVER  . Refer toINSTALLATION - Step 3
  4. INSTALL NO. 2 LOWER STEERING WHEEL COVER  . Refer toINSTALLATION - Step 4
  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 

    Torque: 3.9 N*m (40 kgf*cm, 35 in.*lbf) 

  6. INSPECT SRS WARNING LIGHT 

    Refer toDIAGNOSIS SYSTEM