LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2010 >> RAV4 Base, 2.5 F, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Cooling System (2GR-FE) (Service Specifications)) >> 2GR-FE Cooling >> Torque Specifications >> Torque Specifications

Torque Specifications

WARNING: This page is about a different variant/trim than selected.
COOLANT

Part Tightened N*m kgf*cm ft.*lbf
Cylinder block drain cock plug x Cylinder block 12.7 130 10
WATER PUMP

Part Tightened N*m kgf*cm ft.*lbf
Water pump x Cylinder block for bolt A 21 214 15
for bolt B 9.1 93 81 in.*lbf
for bolt C 9.1 93 81 in.*lbf
Water inlet housing x Cylinder block 10 102 7
Water pump pulley x Water pump 21 214 15
No. 2 idler pulley sub-assembly x Cylinder block 54 551 40
No. 1 engine mounting bracket LH x Cylinder head sub-assembly 54 551 40
Engine mounting stay No. 2 RH x Intake manifold 21 214 15
Engine mounting spacer x Body 95 969 70
Engine mounting insulator RH x No. 1 engine mounting bracket LH for bolt(A)
for Nut(B)
for bolt(C)
95 969 70
for nut(D) 52 530 38
Wire harness x Cylinder head sub-assembly LH 8.4 85 74
engine mounting stay RH x Engine mounting insulator RH 20 204 15
V-ribbed belt tensioner pulley x V-ribbed belt tensioner assembly 48 489 35
THERMOSTAT

Part Tightened N*m kgf*cm ft.*lbf
Water inlet x Water inlet housing 10 102 7
Radiator reservoir tank x Body 5.0 51 44 in.*lbf
COOLING FAN MOTOR

Part Tightened N*m kgf*cm ft.*lbf
No. 1 and No. 2 cooling fan motor x Fan shroud 3.9 40 35 in.*lbf
Fan x No. 1 and No. 2 cooling fan motor 6.3 64 55 in.*lbf
RADIATOR

Part Tightened N*m kgf*cm ft.*lbf
Fan shroud with cooling fan x Radiator 10.5 107 8
Upper radiator support x Radiator support LH and RH 29 296 21
No. 2 fan shroud x Radiator 10.5 107 8
Upper radiator support bracket x Upper radiator support 19 194 14
No. 1 water by-pass pipe x Upper radiator support 5.0 51 44 in.*lbf