LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2010 >> RAV4 Base, 2.5 F, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 396 (Power Windows / Defogger (Service Information)) >> Back Power Window Switch >> Inspection >> Inspection

Back Power Window Switch: Inspection: Inspection

WARNING: This page is about a different car, the 2010 Toyota 4Runner. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT BACK DOOR POWER WINDOW REGULATOR SWITCH ASSEMBLY 
    1. Measure the resistance according to the value(s) in the table below.
      Fig 1: Inspecting Back Door Power Window Regulator Switch & Terminals
      GTY212215Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Standard Resistance

      Tester Connection Switch Condition Specified Condition
      6 (UP) - 1 (E) Manual up operation Below 1 Ω
      7 (DOWN) - 1 (E) Manual down operation Below 1 Ω
      8 (AUTO) - 1 (GND) Auto up/down operation Below 1 Ω
      6 (UP) - 1 (E) Not operated 10 kΩ or higher
      7 (DOWN) - 1 (E) Not operated 10 kΩ or higher
      8 (AUTO) - 1 (GND) Not operated 10 kΩ or higher
      • If the result is not as specified, replace the back door power window regulator switch assembly.
      TEXT IN ILLUSTRATION

      *a Component without harness connected
      (Back Door Power Window Regulator Switch Assembly)