LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2010 >> RAV4 Base, 2.5 F, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Cruise Control (Service Information)) >> Cruise Control Main Switch >> Installation >> Installation

Cruise Control Main Switch: Installation: Installation

WARNING: This page is about a different car, the 2009 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL CRUISE CONTROL MAIN SWITCH 
    1. Install the cruise control main switch with the 2 screws.
      Fig 1: Locating Cruise Control Main Switch Screws
      GTY150679Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Connect the connector.
  2. INSTALL STEERING PAD  . Refer to INSTALLATION - Step 1
  3. INSTALL LOWER NO. 3 STEERING WHEEL COVER  . Refer to INSTALLATION - Step 2
  4. INSTALL LOWER NO. 2 STEERING WHEEL COVER  . Refer to INSTALLATION - Step 3
  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    NOTE:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Refer to INITIALIZATION .

  6. INSPECT STEERING PAD  . Refer to INSTALLATION - Step 5
  7. INSPECT SRS WARNING LIGHT 

    Refer to INSTALLATION - Step 6