LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2010 >> RAV4 Base, 2.5 F, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 267 (Vehicle Stability Control (Diagnostics - Introduction)) >> Vehicle Stability Control System >> System Diagram >> System Diagram

System Diagram

WARNING: This page is about a different car, the 2010 Toyota 4Runner. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Vehicle Stability Control System Diagram (1 Of 3)
GTY218529Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Fig 2: Identifying Vehicle Stability Control System Diagram (2 Of 3)
GTY215236Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Fig 3: Identifying Vehicle Stability Control System Diagram (3 Of 3)
GTY211153Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
COMMUNICATION TABLE

Sender Receiver Signal Line
ECM Skid control ECU
  • Engine speed signal
  • Accelerator pedal position signal
  • Intake air temperature signal
  • Shift position signal
  • TC terminal status
CAN communication
Skid control ECU ECM
  • Yaw rate and acceleration signal
  • VSC data signal
  • Wheel speed signal
CAN communication
Skid control ECU Combination meter
  • Warning/indicator light signal
  • Vehicle speed signal
CAN communication
Four wheel drive control ECU Skid control ECU
  • 4WD status signal
  • L4 status signal
CAN communication
Steering angle sensor Skid control ECU Steering angle signal CAN communication