LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2010 >> RAV4 Base, 2.5 F, AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control (Service Information) >> Brake Actuator >> Reassembly >> Reassembly

Brake Actuator: Reassembly: Reassembly

  1. INSTALL BRAKE ACTUATOR BOLT CUSHION 
    1. Install the 4 brake actuator bolt cushions to the brake actuator bracket.
      Fig 1: Locating Brake Actuator Case Collars From Brake Actuator Bolt Cushions
      GTY245382Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL BRAKE ACTUATOR CASE COLLAR 
    1. Install the 4 brake actuator case collars to the brake actuator bolt cushions.
      NOTE:

      Make sure the collars are in full contact with the cushions.

  3. INSTALL BRAKE ACTUATOR BRACKET 
    1. Install the brake actuator bracket to the brake actuator with the 4 bolts.
      Fig 2: Locating Brake Actuator With Bolts
      GTY245381Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 

      NOTE:

      Tighten the 4 bolts uniformly in alphabetical order.