Rear Door Speaker: Installation
- INSTALL REAR SPEAKER ASSEMBLY
- Using an air riveter or a hand riveter, install the rear speaker assembly with 3 new rivets.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
NOTE:
- Do not pry the rivet with the riveter, as this will cause damage to the riveter and mandrel.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- Confirm that the rivets are seated properly against the speaker.
- Do not tilt the riveter when installing the rivet to the speaker.
- Do not leave any clearance between the rivet head and speaker.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- Do not leave any clearance between the speaker and door. Firmly hold the 2 items together while installing the rivet.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- Connect the connector.
- INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY
(See
REASSEMBLY
)
- INSTALL REAR DOOR ARMREST UPPER BASE PANEL (w/o Power Window)
(See
REASSEMBLY
)
- INSTALL REAR DOOR ARMREST UPPER BASE PANEL (w/ Power Window)
(See
REASSEMBLY
)
- INSTALL REAR DOOR INSIDE HANDLE BEZEL
(See
REASSEMBLY
)
- INSTALL REAR DOOR WINDOW REGULATOR HANDLE ASSEMBLY (w/o Power Window)
(See
REASSEMBLY
)