On-Vehicle Inspection
- INSPECT FRONT NO. 1 SPEAKER
HINT:
Remove interior parts so that the front No. 1 speaker can be seen.
- Check the speaker installation.
OK:
The speaker is securely installed .
If the result is not as specified, reinstall the front No. 1 speaker.
- Visually check the speaker.
OK:
The cone paper of the speaker is not torn .
If the result is not as specified, replace the front No. 1 speaker.
- Speaker resistance check
- Disconnect the front No. 1 speaker connector.
- Measure the resistance according to the value(s) in the table below.
Standard Resistance:
for 7 Speakers
RESISTANCE SPECIFIED CONDITIONTester Connection Condition Specified Condition 1 - 2 Always 1.5 to 2.2 Ω Except for 7 Speakers
RESISTANCE SPECIFIED CONDITIONTester Connection Condition Specified Condition 1 - 2 Always 3.2 to 4.8 Ω If the result is not as specified, replace the front No. 1 speaker.
- Check the speaker installation.
- INSPECT FRONT NO. 2 SPEAKER (w/ Front No. 2 Speaker)
HINT:
Remove interior parts so that the front No. 2 speaker can be seen.
- Check the speaker installation.
OK:
The speaker is securely installed .
If the result is not as specified, reinstall the front No. 2 speaker.
- Visually check the speaker.
OK:
The cone paper of the speaker is not torn .
If the result is not as specified, replace the front No. 2 speaker.
- Check the speaker installation.