LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Corolla LE, 1.8 L >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Engine Fuel System (2ZR-FE) >> Fuel Pump >> Inspection

Fuel Pump: Inspection

  1. INSPECT FUEL PUMP 
  1. Check the resistance.
    1. Using an ohmmeter, measure the resistance between the terminals.

    Standard Resistance 

    STANDARD RESISTANCE SPECIFICATION

    Tester Connection Specified Condition
    1-2 0.2 to 3.0 Ω at 20°C (68°F)

    If the result is not as specified, replace the fuel pump.

    Fig 1: Identifying Fuel Pump Connector Terminal
    G06009915Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. Check the operation.
  1. Apply battery voltage to both terminals. Check that the pump operates.
NOTE:
  • These tests must be done quickly (within 10 seconds) to prevent the coil from burning out.
  • Keep the fuel pump as far away from the battery as possible.
  • Always do the switching at the battery side.

If the motor does not operate, replace the fuel pump.