LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Corolla LE, 1.8 L >> Repair and Diagnosis >> Electrical >> Starter >> Starting System (2ZR-FE) >> Engine Switch >> Installation

Engine Switch: Installation

  1. INSTALL ENGINE SWITCH 
    1. Engage the 2 claws to install the engine switch.
      Fig 1: Identifying Engine Switch Claws
      G06009644Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL NO. 1 SWITCH HOLE BASE  (See INSTALLATION )
  3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY  (See INSTALLATION )
  4. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Instrument Panel Under Cover)  (See INSTALLATION )
  5. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY  (See DISASSEMBLY )
  6. INSTALL INSTRUMENT PANEL FINISH PANEL END LH  (See INSTALLATION )
  7. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL LH  (See INSTALLATION )
  8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 

    HINT:

    See INSTALLATION .

  9. INSPECT SRS WARNING LIGHT 

    (See DIAGNOSIS SYSTEM )