LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Corolla LE, 1.8 L >> Repair and Diagnosis >> Body & Frame >> Seats >> Power Seat Switch >> Inspection

Power Seat Switch: Inspection

  1. INSPECT POWER SEAT SWITCH 
    1. Measure the resistance between the terminals when each switch is operated.

    Standard Resistance (Slide Switch) 

    TESTER CONNECTION SPECIFIED CONDITION CHART

    Tester Connection Switch Condition Specified Condition
    1 (B) - 9 (SLDF) FRONT Below 1 Ω
    4 (E) - 6 (SLDR) FRONT Below 1 Ω
    4 (E) - 6 (SLDR) OFF Below 1 Ω
    4 (E) - 9 (SLDF) OFF Below 1 Ω
    1 (B) - 6 (SLDR) REAR Below 1 Ω
    4 (E) - 9 (SLDF) REAR Below 1 Ω
    Fig 1: Identifying Power Seat Switch Connector Terminals
    G06015200Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

    Standard Resistance (Front Vertical Switch) 

    TESTER CONNECTION SPECIFIED CONDITION CHART

    Tester Connection Switch Condition Specified Condition
    1 (B) - 10 (FUP) UP Below 1 Ω
    4 (E) - 5 (FDWN) UP Below 1 Ω
    4 (E) - 10 (FUP) OFF Below 1 Ω
    4 (E) - 5 (FDWN) OFF Below 1 Ω
    1 (B) - 10 (FUP) DOWN Below 1 Ω
    1 (B) - 5 (FDWN) DOWN Below 1 Ω

    Standard Resistance (Lifter Switch) 

    TESTER CONNECTION SPECIFIED CONDITION CHART

    Tester Connection Switch Condition Specified Condition
    1 (B) - 8 (LUP) UP Below 1 Ω
    4 (E) - 7 (LDWN) UP Below 1 Ω
    4 (E) - 7 (LDWN) OFF Below 1 Ω
    4 (E) - 8 (LUP) OFF Below 1 Ω
    1 (B) - 7 (LDWN) DOWN Below 1 Ω
    4 (E) - 8 (LUP) DOWN Below 1 Ω

    Standard Resistance (Reclining Switch) 

    TESTER CONNECTION SPECIFIED CONDITION CHART

    Tester Connection Switch Condition Specified Condition
    1 (B) - 3 (RCLF) FRONT Below 1 Ω
    2 (RCLR) - 4 (E) FRONT Below 1 Ω
    2 (RCLR) - 4 (E) OFF Below 1 Ω
    3 (RCLF) - 4 (E) OFF Below 1 Ω
    1 (B) - 2 (RCLR) REAR Below 1 Ω
    3 (RCLF) - 4 (E) REAR Below 1 Ω

    If the result is not as specified, replace the switch.