LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Sienna CE >> Repair and Diagnosis >> Brakes >> Brakes Control Systems >> Brake Control System >> Vehicle Stability Control System >> DTC C1225/25 SM Solenoid Circuit >> Description

DTC C1225/25 SM Solenoid Circuit: Description

This solenoid turns on when receiving signals the ECU and controls the pressure acting on the wheel cylinders to control the braking force.

DIAGNOSTIC TROUBLE CODE CHART

DTC Code DTC Detection Condition Trouble Area
C1225/25 When any of the following is detected:
  1. When SM1 or SM2 is ON, excessive electric current on SM1 or SM2 continues for 0.05 seconds or more.
  2. When SM1 or SM2 is OFF, open circuit of SM1 or SM2 continues for 0.05 seconds or more.
  3. When SM1 or SM2 is ON, open circuit of SM1 or SM2 continues for 0.1 seconds or more.
  4. When SM1 or SM2 is ON, electric current application on SM1 or SM2 continues for 0.1 seconds or more.
  5. Short to GND in the switching solenoid (SM1 or SM2) continues for 0.1 sec. or more.
  6. Switching solenoids (SM1 and SM2) are shorted for 0.1 sec. or more.
  • Brake actuator assembly
  • VSC solenoid circuit