LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> RAV4 Base, 3.5 K, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Engine Control System (2AZ-FE)) >> Camshaft Position Sensor >> Inspection

Camshaft Position Sensor: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. INSPECT CAMSHAFT POSITION SENSOR 
    1. Measure the resistance of the sensor.

      Standard resistance 

      TESTER CONNECTION SPECIFIED CONDITION

      Tester Connection Specified Condition
      1 (G+) - 2 (G-) 835 to 1,400 Ω at Cold
      1 (G+) - 2 (G-) 1,060 to 1,645 Ω at Hot
      Fig 1: Measuring Resistance Of Camshaft Position Sensor
      G04973356Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE: Cold and Hot mean the temperature of the coils themselves. Cold is from -10 to 50°C (14 to 122 °F) and Hot is from 50 to 100°C (122 to 212°F).

      If the result is not as specified, replace the camshaft position sensor.