LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> RAV4 Base, 3.5 K, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Starting System (2AZ-FE)) >> Ignition Switch >> Installation

Ignition Switch: Installation

WARNING: This page is about a different variant/trim than selected.
  1. INSTALL IGNITION SWITCH ASSEMBLY 
    1. Install the ignition switch with the 2 screws.
      Fig 1: Installing Ignition Switch
      G04486062Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the ignition key cylinder light connector.
    3. Install the ignition switch connector.
      Fig 2: Installing Ignition Switch Connectors
      G04486063Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL STEERING COLUMN COVER LOWER 
    1. Attach the 4 claws to install the steering column lower cover.
      Fig 3: Installing Steering Column Cover Lower
      G04486064Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL