Charging System (2GR-FE): Generator: Removal
- REMOVE RADIATOR ASSEMBLY
- Remove the radiator (see REMOVAL
).
- REMOVE FRONT WHEEL RH
- REMOVE ENGINE UNDER COVER REAR RH (See REMOVAL
)
- REMOVE FRONT SUSPENSION MEMBER REINFORCEMENT RH (See appropriate step(s) under REMOVAL2
)
- REMOVE RADIATOR RESERVOIR TANK (See appropriate step(s) under REMOVAL
)
- REMOVE FAN AND GENERATOR V BELT (See appropriate step(s) under REMOVAL
)
- REMOVE GENERATOR ASSEMBLY
- Disconnect the 2 wire harness clamps.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- Remove the terminal cap.
- Remove the nut and disconnect the generator wire from terminal B.
- Disconnect the generator connector from the generator.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- Remove the bolt from the cylinder block.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- Remove the 2 bolts and generator.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002