LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2006 >> Matrix Base, 4WD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (1ZZ-FE) - SFI System - Component Tests >> THROTTLE BODY (for 2WD) >> Removal

THROTTLE BODY (for 2WD): Removal

  1. DISCONNECT BATTERY NEGATIVE TERMINAL 
  2. DRAIN ENGINE  COOLANT 
  3. REMOVE CYLINDER HEAD COVER NO. 2 
    1. Remove the 2 nuts and 2 clips, then remove the cylinder head cover No. 2.
      Fig 1: Removing Cylinder Head Cover No. 2
      G04460446Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE AIR CLEANER CAP SUB-ASSEMBLY 
    1. Disconnect the mass air flow meter connector [A].
    2. Disconnect the VSV connector [B].
    3. Remove the 2 wire harness clamps [C].
      Fig 2: Identifying VSV Connector
      G04460447Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Disconnect the fuel vapor feed hose No. 1 [D] from the VSV.
    5. Disconnect the fuel vapor feed hose No. 3 [E] from the VSV.
      Fig 3: Disconnecting Fuel Vapor Feed Hose No. 1, 3 From VSV
      G04460448Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    6. Disconnect the ventilation hose No. 1 from the cylinder head cover.
      Fig 4: Disconnecting Ventilation Hose No. 1 From Cylinder Head Cover
      G04460449Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    7. Loosen the hose clamp bolt and air cleaner hose No. 1.
      Fig 5: Loosening Hose Clamp Bolt And Air Cleaner Hose No. 1
      G04460450Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    8. Remove the air cleaner cap together with the air cleaner hose.
      Fig 6: Removing Air Cleaner Cap Together With Air Cleaner Hose
      G04460451Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE THROTTLE BODY ASSEMBLY 
    1. Disconnect the throttle control motor connector.
      Fig 7: Disconnecting Throttle Control Motor Connector
      G04460452Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disconnect the water by-pass hose [B] from the throttle body.
    3. Disconnect the water by-pass hose No. 2 [C] from the throttle body.
      Fig 8: Disconnecting Water By-Pass Hose From Throttle Body
      G04460453Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Remove the 2 bolts and 2 nuts, then remove the throttle body.
      Fig 9: Removing Throttle Body
      G04460454Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    5. Remove the gasket from the intake manifold.
      Fig 10: Removing Gasket From Intake Manifold
      G04460455Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002