THROTTLE BODY (for 2WD): Inspection
- INSPECT THROTTLE BODY ASSEMBLY
- Check the resistance.
- Using an ohmmeter, measure the resistance between the terminals.
Resistance
TESTER CONNECTION - SPECIFIED CONDITIONSTester Connection Specified Condition 1 (M-) - 2 (M+) 0.3 to 100 at 20°C (68°F) 3 (E2) - 5 (VC) 2.0 to 4.0 k at 20°C (68°F) If the result is not as specified, replace the throttle body.
- Using an ohmmeter, measure the resistance between the terminals.
- Check the resistance.