LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2006 >> Matrix Base, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Audio/Visual System >> Rear Side Speaker >> Removal

Rear Side Speaker: Removal

  1. REMOVE REAR DOOR PULL HANDLE (See  DISASSEMBLY  ) 
  2. REMOVE REAR DOOR WINDOW REGULATOR HANDLE ASSEMBLY (w/o Power Window) (See  DISASSEMBLY  ) 
  3. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY LH (See  DISASSEMBLY  ) 
  4. REMOVE REAR SPEAKER 
    1. Disconnect the connector.
    2. Using a drill of less than diameter 4 mm (0.16 in.), drill out the 3 rivet heads and remove the rear speaker from the rear door panel.
    3. Gently and vertically put the drill to the rivet, and cut the rivet flanges.
      NOTE:
      • Prizing the hole with a drill can lead to damage to the rivet hole or breaking the drill.
      • Take cafe as the cut rivet is hot.
    4. Even if flange is taken off, continue drilling and push out remaining fragments with the drill.
    5. Using a vacuum cleaner, remove the drilled rivet and their dust from the inside of the rear door panel.
    Fig 1: Removing Rear Speaker
    G04466741Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002