LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2006 >> Matrix Base, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Audio/Visual System >> No. 1 Speaker With Box >> On-Vehicle Inspection

On-Vehicle Inspection

  1. INSPECT NO. 1 SPEAKER WITH BOX 

    HINT:

    Remove interior parts so that the No. 1 speaker with box can be seen.

    1. Check the speaker installation.

      OK: 

      The speaker is securely installed. 

      If the result is not as specified, reinstall the No. 1 speaker with box.

    2. Visually check the speaker.

      OK: 

      The cone paper of the speaker is not torn. 

      If the result is not as specified, replace the No. 1 speaker with box.

    3. Resistance check.
      1. Measure the resistance according tot the value(s) in TESTER CONNECTION AND SPECIFIED CONDITIONS  .
        NOTE: The speaker should not be removed for checking.

        Standard resistance 

        TESTER CONNECTION AND SPECIFIED CONDITIONS

        Tester connection Condition Specified condition
        1 - 3 Always 0.7 to 1.9 Ω
        2 - 4 Always 0.7 to 1.9 Ω
        Fig 1: Measuring Resistance Between No. 1 Speaker With Box
        G04466732Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

        If the result is not as specified, replace the No. 1 speaker with box.