LEMON Manuals: Even more car manuals for everyone

Brake Control Power Supply: Installation

  1. INSTALL BRAKE CONTROL POWER SUPPLY 
    1. Install the 2 brackets with the 4 bolts.

      Torque: 5.0 N*m (51 kgf*cm, 44 in.*lbf) 

      Fig 1: Installing 2 Brackets With 4 Bolts
      G04443504Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the brake control power supply with the 2 nuts and bolt.

      Torque: 5.0 N*m (51 kgf*cm, 44 in.*lbf) 

    3. Connect the brake control power supply connector.
    Fig 2: Installing Brake Control Power Supply With 2 Nuts And Bolt
    G04443505Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL DECK SIDE TRIM BOX LH (See step 47 in  INSTALLATION  ) 
  3. INSTALL REAR FLOOR FINISH PLATE (See step 51 in  INSTALLATION  ) 
  4. INSTALL DECK BOARD NO.3 SUB-ASSEMBLY 
  5. INSTALL DECK BOARD NO.2 SUB-ASSEMBLY 
  6. INSTALL DECK FLOOR BOX REAR (See step 53 in  INSTALLATION  ) 
  7. INSTALL DECK FLOOR BOX FRONT (w/o Rear No. 2 Seat) (See step 52 in  INSTALLATION  ) 
  8. INSTALL DECK BOARD SUB-ASSEMBLY (w/o Rear No. 2 Seat) (See  REMOVAL  ) 
  9. INSTALL DECK BOARD SUB-ASSEMBLY (w/ Rear No. 2 Seat) (See step 65 in  INSTALLATION  ) 
  10. CHECK AND CLEAR DTC 

    DTC CHECK / CLEAR