Vacuum Switching Valve: Inspection
- INSPECT VACUUM SWITCHING VALVE
- Check the VSV resistance.
Resistance
VSV RESISTANCE SPECIFIED CONDITIONTester Connection Specified Condition 1-2 37 to 44 Ω at 20°C (68°F) 1 - Body ground
2 - Body ground10 kΩ or higher If the result is not as specified, replace the VSV.
- Check VSV operation.
- Check that air flows from port E to the filter.
- Apply battery voltage across the terminals. Check that air flows from port E to port F.
If the result is not as specified, replace the VSV.
- Check the VSV resistance.