How To Proceed With Troubleshooting
HINT:
Use this procedure to troubleshoot the Front Power Seat Control System with Memory Function.
- Vehicle Brought To Workshop
- NEXT: Go to next step.
- Customer Problem Analysis Check and Problem Symptom Check (See CUSTOMER PROBLEM ANALYSIS CHECK
)
- NEXT: Go to next step.
- Problem Symptom Confirmation
- Symptom Does Not Occur (Go to step 4)
- Symptom Occurs (Go to step 5 )
- Symptom Simulation (See HOW TO PROCEED WITH TROUBLESHOOTING
)
- NEXT: Go to next step.
- Check Multiplex Communication System (See DIAGNOSTIC TROUBLE CODES CHECK/CLEAR
)
Check if any DTCs are output.
HINT:
The position control ECU & switch assy of this system are connected to the Multiplex Communication System. Therefore, before starting troubleshooting, make sure to check that there is no trouble in the Multiplex Communication System.
- Multiplex System DTC is Output (Proceed to "Multiplex Communication System")
- No Multiplex System DTC (Go to step 6)
- Problem Symptoms Table (See PROBLEM SYMPTOMS TABLE )
- NEXT: Go to next step.
- Identification of Problem
- NEXT: Go to next step.
- Adjustment, Repair or Replace
- NEXT: Go to next step.
- Confirmation Test
- NEXT: End